MIDI Designer Reference Manual

User Tools

Site Tools

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

manual:20_md_a_to_z [2025/03/11 19:47] – [Relationships - Other] jkhiser-wikimanual:20_md_a_to_z [2026/05/01 12:11] (current) – external edit 127.0.0.1
Line 45: Line 45:
 ===== Continuous Controls ===== ===== Continuous Controls =====
  
-Continuous controls send a value from a range of MIDI values from MIN to MAX, as set in the control's MIDI Properties panel or in the NAMED TICKS values.  The NAMED TICKS option can provide non-continuous, arbitrary order, and repeated MIDI values, as desired.  Compare to discrete controls (button only), which can send only one (on only) or two (on/off) different values.+Continuous (or variable) controls send a value from a range of MIDI values from MIN to MAX, as set in the control's MIDI Properties panel or in the NAMED TICKS values.  The NAMED TICKS option can provide non-continuous, arbitrary order, and repeated MIDI values, as desired.  Compare to discrete controls (button only), which can send only one (on only) or two (on/off) different values.
  
 Continuous controls: Continuous controls:
Line 362: Line 362:
  
 ---- ----
 +
 +===== Page Sizes =====
 +
 +In the beginning, there was a single iPad page size, and all layouts were the same size.
 +
 +We now have a wide variety of page sizes, and a layout's aspect ratio may not match the current device.  In this case, you have two icons at the bottom right of the display.
 +
 +{{:manual:pan-zoom.png?nolink&400|}}
 +
 +- magnifying glass - zooms in to full width, or out to show full layout\\ 
 +- hand - when highlighted and zoomed-in, repositions layout view\\ 
 +
 +There is capability to disable these icons when the aspect ratio does not match.
 +
 +These icons not shown on a Mac.  The layout is always shown full width.  Use your trackpad or mouse to zoom layout view.
 +
 +New layouts will start in a device's native capability.  Mac layouts will be a maximum size.  For more universal compatibility you can start with a smaller device layout size.  This is not currently a menu option - see Q&A forum where some smaller blank layouts are posted.
 +
 +You can resize an existing layout to a devices native size - //More / Config / Change Layout Size//.  Choosing //TALL// (i.e., portrait) with a layout designed in //WIDE// (landscape) can have adverse impact on control positioning.  
 +
 +
 +
  
 ===== Picker ===== ===== Picker =====
Line 440: Line 462:
  
 ^ Option ^ Action ^ Notes ^ ^ Option ^ Action ^ Notes ^
-| A / B Control | Send values to a second sets of identiacl controls | Exchange activated in CONFIG / MIDI |+| A / B Control | Send values to a second sets of identical controls | A-B exchange activated in CONFIG / MIDI |
 | Button Off Sets to Default | Returns controls to default value when button goes off | | | Button Off Sets to Default | Returns controls to default value when button goes off | |
-|[[manual:20_md_a_to_z#enable_disable_control|Enable / Disable (transmit)]] | Turns on and off control transmit | Affects both MIDI transmit and subcontrol change |+|[[#enable_disable_control|Enable / Disable (transmit)]] | Turns on and off control transmit | Affects both MIDI transmit and subcontrol change |
 | Enable / Disable Receive | Turns on & off MIDI receive | If a selection is made in this box, the //MIDI Receive// option on the MIDI page will not be visible | | Enable / Disable Receive | Turns on & off MIDI receive | If a selection is made in this box, the //MIDI Receive// option on the MIDI page will not be visible |
-| Extra CC and Hold | When touching a variable control, activates the toggle button - the extra Cc | Variable controls only, except Pickers - in Picker properties, but does not function | +| Extra CC and Hold | When touching a [[#continuous_controls|continuous control]], activates the toggle button - the extra Cc | Continuous controls only, except Pickers - in Picker properties, but does not function | 
-| [[manual:20_md_a_to_z#label_value_source|Label Value Source]] | Dynamically change label text | Labels only |+| [[#label_value_source|Label Value Source]] | Dynamically change label text | Labels only |
 | Latch (Make Toggle) | Dynamically change a momentary button to toggle | Momentary buttons only | | Latch (Make Toggle) | Dynamically change a momentary button to toggle | Momentary buttons only |
-| [[manual:20_md_a_to_z#loopers|Looper controls]] | Mute, Reloop, and Length looper control | Target control must be LOOPER |+| [[#loopers|Looper controls]] | Mute, Reloop, and Length looper control | Target control must be LOOPER |
 | Recall Preset | Recalls a preset | Momentary or toggle | | Recall Preset | Recalls a preset | Momentary or toggle |
-| [[manual:20_md_a_to_z#show_hide_panels|Show / Hide (Panels)]] | Dynamically show / hide panels | |+| [[#show_hide_panels|Show / Hide (Panels)]] | Dynamically show / hide panels | |
 | Store Preset | Stores a preset | Momentary or toggle | | Store Preset | Stores a preset | Momentary or toggle |
  
manual/20_md_a_to_z.1741736868.txt.gz · Last modified: (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki